A Professional Bulb Auger To Get Better Planting Results For Do-it-Yourself gardeners can give their flowering plants better root-to-soil contact and reduce crop loss with this compact, flower bulb auger. The bulb auger is a hand-operated clutch digging tool that measures approximately 3 inches in length by about 7 inches in diameter. It has a telescoping handle and rotatable crank with two handles. The rotary crank is used to dig through the ground, loose soil and weeds. The tool can be used as an edger or used as a hand pick.
You can make holes in the center of the bulbs or in the side of the plant pot for the purpose of planting new bulbs or seedlings. Before drilling, you should determine the proper depth. For small holes, use a screwdriver bit or a spade tip. For larger holes, use a drill bit that is too large for the bulb.
To use a bulb auger, remove the string from the cordless drill and hook it over the hole you have just drilled. Then pull the string tight. Next, place a bulb onto the end of the string. Drive the drill into the ground close to the holes you just made. Be sure not to drill through the plastic covering of the bulbs. You may want to coat the holes with some silicone.
Hook up a hose on your garden hose reel to the cordless drill and use it to water the bulb planter on a regular basis. Over time the roots of the bulbs will naturally tighten up and expand. This will happen until you are able to remove the bulb planter completely from the ground. At this point, you can dig a hole that is one to two feet deeper than the original hole that you had in your garden.
Bulb planting does take patience. You should expect to be in your garden for about a year before you see any actual growth. Even after years of being in your garden, bulb augers will produce small bulbs in about four to six weeks. If you have a late bloomer or one that dies out quickly, you should expect to be in your garden for nearly a year before seeing a bulb again.
Most gardeners enjoy the benefits of a bulb auger. There is nothing better than the crisp, clean thuds that are delivered from the ground as the bulbs begin to grow. The ease of the task is also a big plus. If you want to plant, but do not have much time, a bulb auger can be used to speed up the process.
One of the best reasons to use a bulb auger is the money saved on buying flowers every year. Spring bulbs cost a lot more than they did when bulb planting first began. In addition, the weather is getting hotter and the growing season is shorter. You may be thinking that you do not need to spend extra money on flower gardens. However, you will find that in the coming months, you will end up paying a lot more money than what you would have spent if you had known about bulb planting. Even if you do not want to buy flowers every year, you will save money if you know you are planting flowers next season.
If you have been looking for a way to make your garden look better, then you may want to consider a bulb planting tool like a bulb auger. These tools can make your job go a lot easier. You can even cut back on the amount of time you spend on gardening if you do not have to dig holes in the ground. If you are having problems getting plants to grow, then you should look into this kind of help.